STENCIL RECLAIMING CHEMICALS FROM ADTEC 

FOR ALL YOUR STENCIL REMOVAL, STAIN REMOVAL, DEGREASING AND MESH PREPRATION.

ADTEC 10 is a brownish gel, ready-to-use. It helps to create a water film on the degreased mesh to allow a pin-hole free, uniform adhesion for all capillary films, as long as the mesh number and the dry film thickness of the capillary film correspond (see separate table).

ADTEC 10 promotes water retention and uniform wetting of the screen.

 

 

ADTEC 11

Combined abrader/ degreaser gel, ready-to-use.

ADTEC 11 is a slightly alkalineabrasive/degreaser gel to promote better wetting of the fabric and improved adhesion of all types of stencils, especially on new mesh.

 

ADTEC 12

Is a ready-to-use gel to be applied by brush or coating trough.

 

ADTEC 13

is supplied as a concentrate to allow the screen printer to prepare an adequate degreasing solution with one part ADTEC- 13 to 10 part water.(should not be used undiluted)

ADTEC 13 is a slightly alkalineabrasive/degreaser gel to promote better wetting of the fabric and improved adhesion of all types of stencils, especially on new mesh.

ADTEC 14 CONCENTRATED STRIPPER

ADTEC-14 is a water soluble de-coating concentrate developed for the manual and automatic rapid removal of direct emulsions, direct/indirect, capillary from all types of polyester, nylon and metal fabrics

 

ADTEC 15 GEL STENCIL STRIPPER

ADTEC 15 is a thick paste, ready to use, for the decoating of most stencil materials.Use a nylon Brush to apply ADTEC 15 onto both sides of the cleaned stencil. ADTEC 15 paste allows you to remove all screen emulsions and photopolymer films. The paste is however not effective for the removal of gelatine films (indirect photo films).

ADTEC-44 STRIP POWDER

 

ADTEC-44 is a white, oxidizing powder that can be dissolved in water to make a liquid screen process stencil remover.

 



ADTEC18 -HazeRemoverGel,containschlorine

 

PROPERTIES

ADTEC 18 is a high efficient haze removing gel with alkaline reaction. It contains hypochlorite (bleaching active chlorine) and no complexing compounds. The viscosity guarantees an overall uniform  mesh coating with excellent  wettability.

ADTEC 18 is excellently suitable for removing of diazo residues and other typical ghost images, like  stencil- and ink stains from polyester and polyamide (nylon) fabric. For treatment of stainless steel wire cloths and metallized mesh the gel is not suitable

.

 

 

ADTEC-890 HAZE REMOVERGEL, FLASHPOINT 74°C

ADTEC-890 is a high efficient, solvent-based cleaning gel with strong alkaline reaction and flash point of 74°C. The brownish coloured gel contains caustic soda, readily biodegradable solvents and special wetting agents. The viscosity guarantees an overall uniform mesh coating with excellent wettability.

We are located at:

ADTEC


40 Tufton gardens

West Molesey

KT8 1TE

Contact us today!

If you have any queries or wish to make an appointment, please contact us:

 

07969535530

tperrett@adcolour.co.uk

 

Or use our contact form.

Get social with us.

Print Print | Sitemap
© ADTEC