EMULSIONS FROM ADTEC

A RANGE OF DUAL CURE AND PHOTOPOLYMER EMULSIONS FOR ALL YOUR PRINTING NEEDS FROM TEXTILE, GRAPHICS, INDUSTRIAL.

 

ALL-TEX textile emulsion has a solid content of 45% and is suitable for waterbased-discharge and plastisol printing.

ALL-TEX emulsion is a dual cure emulsion with a good exspoure latitude and easy wash put and reclaiming.

suitable for all mesh types from course to fine.

 

Available in 1ltr and 4ltr container sizes.

 

 

ADTEC-DC101 is a Hard and fast screen emulsion with separate diazo-powder sensitizer for most solvent based inks. − Blue colour after exposure with high contrast. − Ideal for humid and warm climates. − Economic, biologically sound. No warning on the label. Thin emulsion for easy coating. − Ideal for fine mesh numbers. − Excellent resolution and definition. − Excellent adhesion and anchorage to the mesh; a strong water or a mild high pressure spray can be used for wash-out.

 

ADTEC-DC101 DIAZO EMULSION    AVAILABLE IN 4.5KG PACKS

 

ADTEC-DC106 Is a Fast, water resistant screen emulsion with separate diazo powder sensitizer for textile screen printing. − Can be de-coated with a high pressure water device. − Light purple with good see-through. 40% solids content before sensitizing. − Low viscosity (relatively thin). − Suitable for all inks containing water only and no solvents. − Simple to use with good resolution and high definition.

 

ADTEC-DC106 WATER RESISTANT EMULSION    AVAILABLE IN 1KG AND 4.5KG PACKS

 

ADTEC-DC200 Is a Fast, dual-cure Diazo photopolymer screen process emulsion with separate Diazo sensitizer powder, for co-solvent ink systems (inks containing a combination of solvents and water) Purple colour, High viscosity, Short exposure time. 42% solids content before sensitizing (38% after sensitizing) it Can be coated wet on wet without intermediate drying to reach a flat stencil profile with a Rz-value of approx. 7-8 at 10-12 microns. Stencils made with ADTEC-DC200 matt can be printed with most solvent –Uv-uv water based and plastisol ink systems.

 

ADTEC-DC200 DUAL CURE EMULSION    AVAILABLE IN 1KG AND 4.5KG PACKS

 

ADTEC-DC210 Is a Fast, dual-cure Diazo-polymer screen process emulsion with separate Diazo sensitizer powder, for solvent based inks. Purple colour, excellent definition and resolution. Good Solvent and humidity resistant. The ready-made stencil can be post hardened by light to increase the ink suitability and to facilitate stencil removal. Short exposure time. 38% solids content before sensitizing; approx. 34% after sensitizing. Medium viscosity; ideal for very fine meshes. Can be coated wet on wet without intermediate drying to reach on a 120-34 polyester mesh a stencil build-up below the mesh of approximately 12 microns. Stencils made
with ADTEC-DC210 can be printed with aggressive inks containing solvents and can be de-coated with adtec-14 stencil stripper

 

ADTEC-DC210 DUAL CURE EMULSION    AVAILABLE IN 4.5KG PACKS

 

ADTEC-DC220 is a Very fast, dual cure diazo photopolymer screen process emulsion with separate diazo sensitizer powder in sachets, for solvent based and UV-inks. – Light purple colour. – Medium viscosity. – Designed for Direct Light Exposure with digital UV-bulbs, laser and exposure diodes. – Can also be exposed with standard contact light systems. 30% solids content before sensitizing (approx. 27% after sensitizing). – Can be coated wet on wet without intermediate drying cycle to reach an adequate stencil profile. – Low odour.
– Ca. 25% shorter exposure time than fast diazo emulsions.

 

ADTEC-DC220 DUAL CURE EMULSION    AVAILABLE IN 4.5KG PACKS

 

ADTEC DC230 BLUE is a Fast, dual-cure diazo photopolymer screen process emulsion with separate diazo sensitizer powder in sachets, for co-solvent ink systems (inks containing a combination of solvents and water) − Blue colour − High viscosity − Short exposure time − Ecologically sound − Must be processed and stored at temperatures not over 20°C

 

ADTEC DC230 BLUE EMULSION    AVAILABLE IN 4.5KG CONTAINERS

 

ADTEC DC240 Fast, dual-cure Diazo photopolymer screen process emulsion with separate Diazo sensitizer powder, for co- solvent ink systems (inks containing a combination of solvents and water) BLUE colour -High viscosity- Short exposure time Must be processed and stored at temperatures not over 20°C

 

ADTEC-DC240 DUAL CURE EMUSLION AS ABOVE    AVAILABLE IN 0.9KG AND 4.5KG CONTAINER

 

SAATI TEXTILE HT FAST Is a Blue triple-cure photo-emulsion for flat-bed textile printing. Suitable for plastisol, water-based and discharge printing inks. Can be catalyzed with Fixer 6, 9 or 10 to produce a waterproof and abrasion-resistant stencils. Very high solids content, 47%. High resolution.  Faster in exposure compared to other emulsion, it allows you to reduce exposure time 30/40%.

 

SAATI TEXTILE HT FAST EMULSION    AVAILABLE IN 1KG AND 4.5KG PACKS

SAATITEX HT Is a Blue triple-cure photo-emulsion for flat-bed textile printing. Suitable for plastisol, 
water-based and discharge printing inks. Can be catalyzed with Fixer 9 to produce a waterproof and abrasion-resistant stencils. Very high solids content, 48%. High resolution. 

 

SAATITEX HT EMULSION    AVAILABLE IN 4.5KG PACKS

SAATIGRAF HS3 is a Blue dual-cure emulsion suitable for General industrial and display graphics, compact disc, half-tone printing, to print UV-cured and solvent-based and plastisol inks • Very high solid content (37%)
•    Particularly competitive in comparison to other products available on the market • Excellent print definition and superior resolution on any mesh • Very high solvent, water and environmental moisture resistance • Easy to reclaim.

SAATIGRAF HS3 DUAL CURE EMULSION    AVAILABLE IN 4.5KG PACK SIZE

ADTEC-SC630 is a one component Photopolymer emulsion - for printing water or solvent based inks, also ideal for abrasive printing media. Ready to use emulsion ,Red, medium viscosity, 47% solid content ,Exposure time of SC30 is about 50% slower compared to SC633 and therefore the resolution is accordingly higher, Resistant to plastisol, water and solvent based, UV-, sublimation- and discharge inks, Outstanding abrasion and humidity resistance, Excellent print definition on any mesh.

 

ADTEC-SC630 PHOTOPOLYMER EMULSION    AVAILABLE IN 1KG AND 4.5KG PACKS

ADTEC-SC633 For garment printing Designed for use with DLE (Direct Light Exposure for CtS) Ready to use emulsion which is Blue in colour, 45% solid content with excellent resistance to plastisol, water based, sublimation and discharge inks. Outstanding abrasion and humidity resistance with excellent print definition on any mesh. Resistant to discharge inks without adding Diazo or hardening with catalyst. Exposes 8 times faster than Diazo or dual-cure emulsions and can be coated wet on wet without intermediate drying.

 

ADTEC-SC633 PHOTOPOLYMER EMULSION    AVAILABLE IN 1KG AND 4.5KG PACKS

We are located at:

ADTEC


40 Tufton gardens

West Molesey

KT8 1TE

Contact us today!

If you have any queries or wish to make an appointment, please contact us:

 

07969535530

tperrett@adcolour.co.uk

 

Or use our contact form.

Get social with us.

Print Print | Sitemap
© ADTEC